Speedy Cowl

Machine: Standard with ribber; insert fine knitting bar

Yarn: 1 stand 2/24

Tension: 6/6

Pattern: Any tuck pattern (I used Stitch World #282 and #268)

Measures: 40 X 9”

  • Bring EON into work over 30 X 30 on MB
  • With WY, K 1 R; hang comb and weights
  • Pull rest of N in between into work
  • K few R of WY; end COR; 1 R ravel cord; COL
  • Add MY and K 1 R to right
  • Rack H5; pull ribber into work
  • Pull corresponding ribber N’s into work with end N’s on ribber for FNR
  • K 1 R to L
  • Hang ribber comb and weights
  • RC000
  • Prepare pattern; KCII
  • Outside turn mark; T. 6/6; K 1 R; push in both tuck buttons
  • K to RC 300 to 325 (depending on length you like)
  • After about 100 rows, hang side claw weights, remove bottom weights and hang 1 triangle comb into work and insert weight in it; move up every 25- 50 R
  • End patterning with COL; for last row to right, turn off patterning; COR
  • Put all ribber sts to MB; drop ribber
  • K 1 R to left
  • Hang first end of cowl off WY onto N
  • Carriage tension to 10 plus
  • K 1 R to right
  • Remove sts with loop thru loop B/O
  • Steam to soften drape (can be gently stretched a bit to size if desired)

You may copy, print and use any of the info on my blog. Please do not copy and repost anywhere on the internet without contacting me to get my permission.  Please do not sell this pattern as your own.  Thank you, Ann

 

Advertisements